DESCRIPTION:
Softening cartridge reduces scale-forming minerals

* Softening cartridge reduces scale forming minerals like calcium and magnesium in hard water situations.
* May be used on water having up to 30 grains hardness per gallon (500 mg/L) at flow rates of up to 1/2 gallons per minute.
* Sanitary quick change cartridge makes replacement easy.
* Should be with an Everpure fine filter cartridge installed in a series plumbed twin head.

NOTE: No electrical connection required

The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used with disinfected water that may contain filterable cysts.
Features:

* Scale Control*

Capacity: 2,000 grains
Maximum Flow: 0.5 gpm (1.9 Lpm)
Qty. per Case: 1
Working Pressure: 10 - 125 psi (0.7 – 8.6 bar), non-shock
Max. Temp: 35 - 100°F (2 - 38°C)
H: 20.75” D: 3.25”

Problem solving and special application cartridge
* Demineralizing water filter for water with high mineral content
* Removes total dissolved solids (TDS) by using a mix of cation and anion resin
* Especially useful on low capacity flash steamers and warrmers that are not emptied each day
* Reduces scale build-up
* Sanitary cartridge replacement is simple, quick and clean. Internal filter parts are never exposed to handling or contamination

NOTE: No electrical connection required

Contents: Acid cation and base anion exchange resin

Features:
* Scale Control*

Capacity: 1600 Grains
Maximum Flow: 0.5 gpm (1.9 Lpm)
Qty. per Case: 0
Working Pressure: 10 - 125 psi (0.7 – 8.6 bar), non-shock
Max. Temp: 35 - 100°F (2 - 38°C)
H: 20.75” D: 3.25”

Problem solving and special application cartridge
* Taste and odor filter for extremely turbid water
* Granular activated carbon reduces chlorine taste and odor and other unwanted contaminants
* Effectively reduces chloramines from water
* Ideal as a prefilter for RO membranes which are sensitive to chlorine

NOTE: No electrical connection required

Contents: Granular activated carbon

Features:
* Taste & Odor

Capacity: 30,000 gallons
Maximum Flow: 1.5 gpm (5.74 Lpm)
Qty. per Case: 6
Working Pressure: 10 - 125 psi (0.7 – 8.6 bar), non-shock
Max. Temp: 35 - 100°F (2 - 38°C)
H: 18.75” D: 3.25” Certifications: NSF53

Problem solving and special application cartridge

* Dual bed granular filter improves taste and odor where incoming water is especially turbid
* Reduces chlorine taste and odor and other unwanted contaminants
* 40 micron filtration
* Sanitary cartridge replacement is simple, quick and clean. Internal filter parts are never exposed to handling or contamination

NOTE: No electrical connection required

Contents: Granular activated carbon for taste and odor removal. A non-woven septum for filtering to approximately 40 microns
Features:

* Chlorine Reduction
* Particulate Reduction
* Taste & Odor
* Turbidity Reduction

Capacity: varies
Maximum Flow: Maximum 1.67 gpm (6.3 Lpm)
Qty. per Case: 1
Micron Rating: 40.00
Working Pressure: 10 - 125 psi (0.7 – 8.6 bar), non-shock
Max. Temp: 100°F
H: 20.75” D: 3.25”

Problem solving and special application cartridge

* Neutralizing cartridge for acidic water conditions
* Elevates pH in water
* Reduces acidic corrosion
* Used on water wth pH between 5.6 and 6.5
* Protects equipment

NOTE: No electrical connection required

Contents: Granules of magnesium oxide; will increase the hardness of water

The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used with disinfected water that may contain filterable cysts.
Features:

* Taste & Odor

Capacity: Varies
Maximum Flow: 0.5 gpm (1.9 Lpm)
Qty. per Case: 1
Working Pressure: 10 - 125 psi (0.7 – 8.6 bar), non-shock
Max. Temp: 35 - 100°F (2 - 38°C)
H: 20.75” D: 3.25”

DESCRIPTION:
Problem solving and special application cartridge

* Oxidizing water filter for iron and sulfur in low water volume applications
* Removes noxious tastes and odors by oxidizing dissolved iron, sulfur and manganese (up to 10 ppm)
* Reduces corrosion in coffee brewers, fountain equipment and water coolers
* Reduces metallic tastes and sulfur (rotten egg) tastes
* Reduces metallic stains
* pH range: 6.6 to 8.8

NOTE: No electrical connection required

Contents: Granular of manganese green sand
Features:

* Taste & Odor

Capacity: 1,000 PPM gallons
Maximum Flow: 0.5 gpm (1.9 Lpm)
Qty. per Case: 1
Working Pressure: 10 - 125 psi (0.7 – 8.6 bar), non-shock
Max. Temp: 35 - 100°F (2 - 38°C)
H: 20.75” D: 3.25”

DESCRIPTION:
Delivers quality water for foodservice applications

* Carbon block filter finely polishes water for high quality beverage and food applications
* Reduces chlorine taste and odor and other offensive contaminants that can adversely affect the taste of water and beverages
* Reduces extra fine dirt and particles as small as 5 microns in size
* Reduces limescale build-up that can cause excessive machine downtime and increased maintenance costs
* Plus, scale reduction lowers energy costs
* Sanitary cartridge replacement is simple, quick and clean. Internal filter parts are never exposed to handling or contamination
* NSF Certified under NSF/ANSI Standard 42
* Particulate and Scale Reduction as tested by Everpure

NOTE: No electrical connection required

The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Features:

* Particulate Reduction
* Scale Control*
* Taste & Odor

Capacity: 10,000 gallons
Maximum Flow: 2.5 gpm (9.46 Lpm)
Can Size: 7
Qty. per Case: 0
Micron Rating: 5.00
Working Pressure: 10 - 125 psi (0.7 – 8.6 bar), non-shock
Max. Temp: 35 - 100°F (2 - 38°C)
Inlet Outlet Size: 3/8"FPT/3/8"
H: 20.75” D: 3.25” Certifications: NSF42