| |
Omnipure E-Series Filters
Residential (Everpure Compatible) Water Filter Cartridges
|
|
| |
Economical replacement bodies
for existing permanent heads currently on the market.
The new E-Series was designed for our customers that are using existing
permanent heads including Everpure, but would like an alternative
to the replacement bodies offered.
The main benefit of the E-Series is price to performance value.
E-Series filters, with equal or superior filtration capability,
are offered at a considerably lower price than comparable replacement
bodies on the market.
E-Series replacement bodies we offer are in 10", 12" and
14" lengths. Bodies are tested to withstand pressure of 125
psi and temperature of 100° F. Media service life is designed
to handle up to 3,000 gallons in some models and filtration micron
ratings are as low as 1 micron in other models.
Test Information:
The E-Series filter housing and fittings have been tested for performance
under NSF Standard 42. Tests included Hydro Static Testing at 300
psig and Cycle Testing of 100,000 repetitions from 0 to 150 psig.
Complete test results are available from Omnipure. Omnipure products
have been tested and listed under Standard 42 for taste, odour and
chlorine reduction; or particulate reduction; or have been materials
certified. All filters should be installed on cold water lines only.
NOTE: Activated carbon filters are not intended to be used
where the water is microbiologically unsafe or with water of unknown
quality without adequate disinfection before or after the unit.
|
|
|
|
|
|
|
|
Can be used as a
replacement for:
Everpure H-54, ADC, AC
|
Can be used as a
replacement for:
Everpure H-104, S-101, S-100
VOC #1 & 2, THM #1 & 2
|
Can be used as a
replacement for:
Everpure H-300, H-300M,
H-300HSD, H-1200 (x 2)
|
|
|
